An overview of Milo's lights and what they mean
Milo has 2 sets of lights (LEDs) on the front, communicating information about Milo's status and settings:
- A ring of 8 white LEDs around the Milo button. The LED ring provides supporting information at a quick glance.
- One 2-color LED at the bottom of the LED ring. This is mainly showing power and battery status.
White LED ring
Think of the 8 LEDs as an analog clock-face with LED_1 at the 1 o'clock position and LED_8 in the 11 o'clock position.
LED pattern | Context | Meaning | Guidance |
"Breathing" followed by a wave | You pressed the power button | Milo is powering up | Allow Milo to power up completely before use |
Circling LED | You are holding the group button | Milo is looking for another Milo to group with | Wait until you hear "Connected", then release the group button |
Circling LED | You have enabled voice commands and Milo heard the wake word | Milo is listening for your command | Say your voice request, or wait a few seconds for timeout |
LED_4 - LED_5 alternating | You enabled Mute indicator in Milo Link | Your Milo's mics are currently muted | Unmute before talking to your group |
All LEDs briefly light up | You tapped-to-choose this Milo in Milo Link | Milo identifies itself | You can now change settings for this Milo |
LEDs "count up" from LED_1 to LED_8 | You're updating Milo software | LEDs show the update progress | Allow update to finish and Milo to reboot before use |
LEDs "count down" from LED_8 to LED_1 | You requested to leave the group or recorded a name | Milo is waiting for your confirmation | Respond, or wait for timeout |
Portion of ring briefly lights up | You're checking the battery level | Milo shows the approximate level | |
LED_1 to LED_8 turn on | You're turning up the volume | Volume is increasing | |
LED_8 to LED_1 turn off | You're turning down the volume | Volume is decreasing | |
LED_1 blinks 3 times | You're turning down the volume | Minimum volume is reached |
Red-Green LED
LED pattern | Context | Meaning | Guidance |
Solid Red (Amber) | Milo is connected to a power supply | Milo is charging | |
Solid Green | Milo is connected to a power supply | Milo is fully charged | |
Flashing Red (slow) | Milo is powered up and not charging | Normal operating mode. | |
Flashing Red (faster) | Milo is powered up and not charging | Normal operating mode. Battery charge is getting low. | Consider charging soon. |
Flashing Red & Green | Milo is very cold, such as after outdoor use in cold temperatures | Charging error |
Unplug Milo from charging source. Allow Milo to warm up to room temperature, then try charging again
|
Flashing Red & Green | If the Milo is at room temperature | Charging error |
Unplug Milo from charging source.
|